Having potholes, oil strains, cracks and other stains on your once so-smooth driveway surface affects your home exterior appearance.
Cracked and stained driveways always detract the viewers from curb appeal; be it a concrete driveway or Asphalt driveway.
However, with the best sealers for concrete and asphalt driveways, you can protect the surface from getting cracked, protection against harmful chemicals and protect the driveways from UV radiations.
There are multiple types of sealers and they vary upon the driveway’s condition.
So, here we are today to discuss the best driveway sealers one can get for asphalt and concrete driveways.
In addition, there are multiple brands out there who claim to have the best quality-products and in reality it’s the opposite.
And before we see the top-rated and best brands which are tried and tested by us and you can rely on them, here is our top pick.
Our Best Pick (Asphalt & Concrete)
We consider the Jetcoat sealer best for asphalt driveway as it offers the 10 years of warranty and can be applied by beginners and professionals to fill pockmarks, holes, potholes and cracks and last longer as compared to other asphalt sealers.
For concrete driveways, we consider ToughCrete Concrete sealer the best option as it offers the high penetrating feature and protects the concrete surface deeply.
And it can be used for commercial and domestic use.
Comparison Table Of The Best Driveway Sealers
Below we have compared our top picks of Driveway sealers of all types that we have also reviewed in the later section below.
Choose any two Sealers from the dropdown option below in the table to compare.
| Best Driveway Sealers | VS | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. Liquid Rubber Waterproof Sealant | 2. Armor AR350 Solvent Based Acrylic Concrete Sealer | |||||||||||||||||||
| Product | 
| 
| ||||||||||||||||||
| Type | Waterproof Sealant | Acrylic concealers | ||||||||||||||||||
| Usage | Potholes, cracks and stains | For pockmarks, Uv-resistant and offers glossy look | ||||||||||||||||||
| Driveway type | Asphalt | Asphalt and concrete | ||||||||||||||||||
| Quantity | 5 gallons | 5 gallons | ||||||||||||||||||
| Warranty | 4-5 years | 3 years | ||||||||||||||||||
| Buyer’s ratings | 4.5 stars out of 5 | 4.6 stars out of 5 | ||||||||||||||||||
| Our ratings | 8.5/10 | 8/10 | ||||||||||||||||||
| Amazon | Check on Amazon | Check on Amazon | ||||||||||||||||||
| Ebay | Check on Ebay | Check on Ebay | ||||||||||||||||||
| Full Review | Jump to Full Review | Jump to Full Review | ||||||||||||||||||
#1 Pick
Jetcoat Sealer is the #1 Best Sealer for Asphalt Driveway in our list.
Top Brands/Manufacturers of Driveway Sealers
Here are the top brands of driveway sealers on which you can rely on.
These brands make the best driveways sealers for both asphalt and concrete surfaces.
- L R.
- Foundation Armor.
- Rainguard.
- Quest chemicals.
- Jetcoat.
- Henry.
Consumer Guide for Asphalt & Concrete Driveway Sealers
Here are the important factors to consider when buying a sealer for Asphalt and concrete driveway.
We are going to discuss the types of sealers for driveways in detail so you can choose the best one according to your driveway condition.
Coal tar sealers
These sealers are used on asphalt driveways and have been used on streets for decades.
As the name indicates, they are made up of coal tar, which helps to fill the cracks as it is black syrup-like liquid substance.
It removes oil and gasoline stains easily. The sealer can last up to four years.
However, it contains some organic volatile compounds which are not environmentally friendly and require chemical coatings on it to suppress them.
Nonetheless, these sealers lack expanding and contracting features and after 3-4 years, the seal starts to crack.
Also, this sealer is not recommended by us.
Asphalt-based Sealers
True to its name, these sealers are specifically designed for Asphalt driveways.
These sealers are easy to apply and are expensive as compared to coal tar sealers. In addition, they are known as the best DIY driveway sealers.
No heating equipment is needed and the sealer contains the same ingredients present in the real asphalt driveway.
These sealers provide a smooth and hard surface to the asphalt driveways and can last up to 6 years.
Mold Inhibitors
If you live in a humid region or a region where it rains often then you are likely to get molds, lichen, moss, algae, mildew on your asphalt or concrete driveways.
So, if your driveway is prone to mold and fungal growths, mold inhibitors sealers would be the best choice to opt for.
Fill-and-seal sealers
As one can guess the procedure from the name of the sealer, Fill-and-seal sealers are mostly used on asphalt driveways which fill the cracks on the surface and seal them afterwards.
These sealers are ideal to fill small and tiny holes and work best on them.
However, having large cracks and potholes on your asphalt driveways won’t be going to be fixed by fill-and-seal sealers.
Plain sealers
Plain sealers are also called plain asphalt sealers which basically is a thick black liquid which can be only applied via heavy-duty roller.
These sealers don’t fill any holes, cracks or potholes but offer a plain smooth surface to the driveway as it contains only a fine silica powder.
The plain asphalt sealer allows the surface to have an anti-slippery touch.
Epoxy sealers
Epoxy sealers are good for concrete driveways and unlike asphalt-sealers, they don’t penetrate deeply.
These sealers create a strong and hard layer on your driveway and seals it from getting any physical damage with a hint of gloss.
These are the closest alternatives to the acrylic sealers (a bit costly).
In addition, they are water-repellent sealers and are designed to add unique designs to the driveways.
Acrylic sealers
These sealers prevent the concrete and asphalt surfaces from UV radiations and come in a variety of colors and finishes.
These are good in harsh and hot environments as the surface remains stabilized and stain-free.
Cure and seal products
Another DIY-friendly driveway sealer for concrete driveways.
These sealers are applied on the freshly-made concrete driveways and helps the surface to retain moisture and makes the concrete more durable and harder.
The only purpose of this sealer is to cure and strengthen the freshly placed concrete.
Penetrating sealers
These are the most commonly used concrete driveway sealers; penetrating sealers.
These sealers are not applied directly after the concrete driveway is made.
These sealers are available in both; solvent-based and water-based while water-based being the eco-friendly option.
These are applied usually after 25-27 days after concrete driveways are being cured. A single coating of these sealers can last up to 11 years.
These sealers prevent the surface from stains and repels the water from penetrating into the surface which ultimately prevents the driveway from getting cracks (due to freezing).
Oil-based Sealers
The oil-based sealers can easily penetrate into the asphalt driveways and protect them for more than 6 years without the need to reapply.
However, these spears don’t protect the surface from the UV radiations.
How to apply
After selecting the best driveway sealer (asphalt or concrete) according to your driveways’ condition, the next step to consider is how to apply?
Well, there are different ways to apply the driveway sealers like; via sprayers, rollers, brushes, etc.
However for liquid (not thick consistencies) form sealers, we would recommend you to go for sprayers as they provide better control and evenly distributes the sealer on a surface.
However, every sealer comes with the information about how to apply it, so, you better check the instructions before making a purchase.
And, to ease this confusion, we will let you know how to apply each and every sealer whether it is for concrete or asphalt driveway.
Top 15 Asphalt and Concrete Driveway Sealers (Reviews)
After filtering out the market, here are the best ones we loved and also loved and top rated by the consumers as well.
We will cover all types. So, let’s dive in..!
1. Liquid Rubber Waterproof Sealant
The first one on our list is L R liquid rubber water-proof sealant for Asphalt driveways.
The jet black color of this sealer compliments the asphalt driveways.
The water-proof layer of the sealer prevents the asphalt driveway from cracks, potholes, stains and damage caused by heavy rainfall.
The interesting feature of this sealer is, it is very tough and hard and is considered as nearly bullet-proof.
However, the advertisement shows that it can be applied on wood also but we would recommend it to use only on asphalt driveways.
You can apply this sealer via a paint brush, roller or sprayer depending upon your personal choice.
In addition it can cover up to 400 sq ft surface; 5 gallon size.
Pros
- It doesn’t contain any volatile compounds.
- Nature-friendly.
- Good for flat and vertical surfaces.
- It is water-proof.
Cons
- A bit thinner layered coating than flex seals.
Consumers reports
Thousands of buyers have rated this driveway sealer with 4.5 stars out of 5.
The positive feedback about this waterproof sealant is immense and impressive.
The coating is easy to apply and even homeowners with zero knowledge about sealer can easily apply by following instructions.
Our suggestion
Our ratings: 8.5/10
We consider it the best liquid sealer for asphalt driveways which gives the surface a bullet-proof touch.
It can also be applied on concrete driveways but we would recommend you to stick to the asphalt driveways.
ADDITIONAL TIP: This sealer can bubble up when used on other than asphalt driveways.
2. Armor AR350 Solvent Based Acrylic Concrete Sealer
This sealer is specifically designed for concrete and asphalt driveways.
This sealer is acrylic driveway sealer and is a non-yellowing solvent which is more inclined towards the glossy look of the driveway.
If your driveway is having pockmarks, cracks, abrasions or the surface is deteriorating slowly, then applying this acrylic sealer not only cure them but also gives a glossy look.
The number of coatings of the sealer depends upon the condition of your driveway.
This sealer basically shortens the pores and cracks on the surface chemically and one needs to apply it after every 3 to 5 years for smooth and effective results.
ADDITIONAL TIP: We wouldn’t recommend this sealer to be applied on an already painted driveway.
Pros
- It can cover up to 900 sq.ft.
- Simple application.
- UV-resistant.
- It can be applied to unsealed surfaces.
- Top rated sealer in the market.
Cons
- One needs to double coat it for good results.
Consumers reports
Thousands of buyers have rated this sealer with 4.6 stars out of 5.
According to the majority of homeowners with a concrete driveway praised this sealer.
The wet and shiny look this sealer gives to the driveways is beyond expectations and removes all the stains from the surface.
Our suggestion
Our ratings: 8/10.
This acrylic sealer is considered good for concrete driveways and although it is a bit expensive, the quality and longevity it offers outshines all.
In addition, this sealer is breathable and the application of it is quite easy.
3. Jetcoat Asphalt Driveway Sealer (10 Years warranty)
Best asphalt driveway sealer.
The next we are going to review is a sealer for asphalt driveway which is a polymer and emulsion based sealer which is specifically designed for all types of asphalt driveways and can be applied on damp driveways also.
Basically, the Jetcoat is an all-in-one sealer but is only limited to asphalt driveways and it can easily fill small cracks, holes, pockmarks, and remove the stains easily from the surface.
For your information, the coverage of 5 gallons varies from brand to brand and this sealer can easily cover 350-400 sq.ft. easily.
One can easily apply it on the surface via a brush also.
Pros
- It offers a non-slip feature.
- Good for quick asphalt maintenance.
- Can easily fill small cracks.
- Long-lasting.
- It can be applied on a wet/damp driveway also.
- 10 years of warranty.
Cons
- Not eco-friendly.
- Not for concrete driveways.
Consumers reports
Buyers have rated this sealer for asphalt driveway with 4 stars out of 5.
Consumers loved the anti-slip coating of this asphalt driveway sealer.
It is basically ready to fill and seal the asphalt driveway and can easily seal any blacktop surface.
Also, users fond this sealer very easy and instant to apply on an asphalt driveway.
Our suggestion
Our ratings: 9/10
We consider this asphalt sealer best for DIY-ers who own an asphalt driveway as this sealer is very easy to apply and can last up to 10 years.
We personally considered it the best sealer for asphalt driveways.
4. Rainguard Advanced Waterproofer Concentrate
The next is the water-proof sealer for concrete driveways. It doesn’t change the texture or color of the surface as it is colorless and odorless unlike some oil-based sealers.
However, this sealer is specifically made for concrete driveways and woods.
A simple one coating of it can prevent the driveways from rain water and eventually prevent the surface from getting cracked or holes.
It can protect the surface from getting stains and cracks irrespective of the weather conditions.
Pros
- It offers no-odor as it is a water-based sealer.
- Easy to apply.
- It comes with an advanced technology which micro-locks the cracks and seals them.
- It offers expanding and contracting features.
Cons
- According to some reports, this sealer converts into a chips-form when applied in bulk quantity.
Consumers reports
Buyers have rated this sealer with 4.3 stars out of 5.
According to them, this concrete driveway sealer is easy to apply and repels the water very efficiently and prevents the surface from getting cracked.
In addition, it can be used on a commercial level.
Our suggestion
Our ratings: 8/10.
If you are looking for a transparent water-proof sealant for your concrete driveway to prevent it from getting cracked due to rain water, then this one would be a considerable option.
5. E-Z Stir Driveway Asphalt Filler/Sealer
Well, the E-Z stir driveway asphalt sealer which performs two functions at the same time; fills the cracks and holes and protects the surface from any future damage.
The stirring of this sealer requires some time after opening the container and before application.
However, once you have stirred it thoroughly, the application is quite simple and easy.
We would recommend you to use heavy-duty rollers to apply this sealer.
The 5 gallon container of this sealer can cover between 250 to 500 sq.ft.
The interesting feature of this sealer is, it dries very quickly and takes only 3-4 hours to dry. This sealer improves the durability of the asphalt driveways.
Pros
- Affordable.
- It dries up very quickly unlike others.
- Shiny Jetblack color.
- Durable.
- Easy to apply.
Cons
- The stirring of this liquid prior to applying is a bit time-consuming.
Consumers reports
Buyers have rated this sealer with 4 stars out of 5.
According to the buyers who applied this sealer on their asphalt driveways, are impressed with the outcomes of it.
However, big potholes can’t be filled by this sealer.
Our suggestion
Our ratings: 8.5/10
If you are looking for an affordable option for your asphalt driveway sealer and just want to even the surface and remove all stains from the surface in order to get a jet black shiny surface, then this one would be a considerable option.
6. Asphalt Driveway Sealer 5 Gal
Best for commercial-use.
Our next recommendation is asphalt sealer for professional use and mostly applied on footpaths, parking lots and big driveways.
It protects the asphalt surface from chemicals, UV radiations, harmful liquids and water.
It makes the driveway look dark and shiny.
In addition, it doesn’t only maintain the natural look of the asphalt surface but also protects it for the future as well.
The 5 gallon quantity of this sealer can cover 600 sq.ft of the surface.
Pros
- Can handle large potholes, stains.
- Long lasting protection.
- Smooth surface after application.
- Can handle all the harsh environments.
Cons
- The sealer is a bit thick in texture.
Consumers reports
Buyers have rated this sealer with 4.2 stars out of 5.
The only negative feedback we received of this sealer is about the thick consistency of it as some of them face some issue in stirring it.
Otherwise, the performance of this sealer is pretty good.
Our suggestion
Our ratings: 8.5/10
If you are looking for an asphalt sealer for any commercial use or to seal the parking areas, foot paths, then this one would be a good match for you.
7. Gardner-Gibson 7545-GA Drive 5 Blacktop Driveway Filler
The next recommendation is for blacktop and asphalt driveways.
This one is specifically recommended to beginners and they can apply it easily with having zero knowledge and the sealer is environment friendly.
The interesting feature of this sealer is, this asphalt sealer is more durable than any other asphalt sealers.
Furthermore, it is suitable for both environments; hot and cold.
One wouldn’t be noticing any cracks, stains, holes on the surface when this sealer is applied.
Pros
- Eco-friendly.
- Good for both asphalt and blacktop surfaces.
- It can cover 350 sq.ft easily.
- Easy and simple to use.
Cons
- It is not ideal to use this sealer for large holes and cracks.
Consumers reports
Buyers have rated this sealer with 4 stars out of 5.
According to them, one just needs to mix the sealer with the tool and it takes merely 4-5 minutes to stir it and apply on the surface.
However, if you have large and big potholes, cracks in the driveway, you need to fix it before applying this sealer.
Our suggestion
Our ratings: 8/10.
We recommend this asphalt and blacktop sealer for beginners who just want to open the sealer and apply it on the surface without worrying about any adverse effects of it as it doesn’t contain any harmful substance and is environmentally friendly.
8. Penetrating Clear Solvent-Based Sealer by Foundation Armor
The next recommendation on our list is for concrete driveways.
This sealer can prevent the concrete surface for more than 10 years only if applied properly.
In addition, this sealer not only prevents the surface from cracks, potholes but also protects it from molds, mildews, and fungal growth (when we tested it, we came to know this information).
It is good for interior and exterior use. You can use it on your garage and basement floors, sea walls, roadways and bridges and many more places in your house.
Also, the sealer won’t change the outer looks of the driveway or any other place you are applying at it.
You won’t be facing any wear and tear issues as the sealer is totally breathable.
Also , the sealer can cover the surface up to 300 sq.ft and it depends upon the porosity of the land.
Pros
- Good for interior and exterior usage.
- Penetrates into the concrete really well.
- It provides good protection to the surface from getting stains and potholes.
- It is a solvent based sealer and doesn’t require water to mix in it.
Cons
- The surface might get stains after applying the sealer.
Consumers reports
Hundreds of buyers have rated this sealer with 4.6 stars out of 5.
What really impressed the users about this sealer is, it is alkaline resistant and it effectively eliminates the salt damage on the surface.
Furthermore, it is easier to apply on the concrete surface.
Our suggestion
Our ratings: 8.5/10.
We consider this one of the best sealers for concrete driveways as it penetrates really well and protects the surface deeply and for a long time.
TIP: However, we would recommend you to apply this sealer with a roller instead of a brush or sprayer.
9. ToughCrete Concrete Driveway Sealer
Best for concrete driveways.
The next recommendation is another concrete sealer.
This is another penetrating sealer and unlike the previous one (mentioned above), this one is more inclined towards commercial usage.
The interesting feature of this sealer is, the 1 gallon of container can cover around 600 sq.ft which is quite unique.
It contains silane-siloxane compound, which repels the water efficiently and can last up to 10 years.
You can also apply this sealer on chimneys, bricks, outdoor fireplaces or any other place which is made up of concrete.
Pros
- It covers up to 600 sq.ft.
- It can also be used for exterior and interior as well.
- It offers a 10 year warranty.
- Water-repellent.
- Easy to apply.
Cons
- It might leave some stains on the surface.
Consumers reports
Hundreds of buyers have rated this sealer with 4.2 stars out of 5.
The positive feedback outshines the negative response.
According to the majority, this water-repellent sealer is good for ultimate protection from the salt and water damage for up to 10 years.
Our suggestion
Our ratings: 9/10.
We consider it the best concrete driveway sealer overall as it can be used at a commercial level and on a domestic level as well.
10. RainGuard Water Sealers – Concrete Sealer
Budget-friendly concrete driveway sealer.
The next recommendation is for those who have a low budget and looking for a concrete driveway sealer.
One can apply it via a brush, sprayer or roller depending upon the personal choice.
However, applying it with a sprayer will save you more time and you will be spreading it evenly.
This sealer creates a hydraulic layer on the surface which protects the concrete surface from getting any fungal or mold growth.
In addition, most of the customer’s asked us how to remove this sealer if it fell on the carpet?
You can easily remove the concrete sealer from your carpet (if spilled accidentally) with soap and water and clean it with a damp cloth.
Pros
- It protects the surface from UV radiation.
- It can cover up to 1000 sq.ft (5 gallon).
- Easy to apply.
- Easy to follow instructions.
- It follows the state environmental guidelines.
Cons
- It doesn’t offer any finish options.
- Not for asphalt surfaces.
Consumers reports
Buyers have rated this sealer with 4.1 stars out of 5.
The buyers are completely satisfied with this sealer and it dries quickly in sunlight.
Most of them praised the performance of it as it doesn’t let the surface turn into yellow over time (concrete surfaces).
Our suggestion
Our ratings: 8.5/10.
If you are on a low budget and want to get the best bang for your buck for your concrete driveways or surfaces, Rainguard concrete sealer would be a considerable option.
11. Eco Advance Concrete/Masonry Siloxane Water Repellent
The next recommendation is for those who have small children and pets around there and want a safe option to consider to protect the concrete driveway.
The compounds and chemicals which are present in this sealer are safe for your family and environment.
For those who don’t know, Eco advance is a well-reputed brand whose products are non-toxic and environmentally friendly and this concrete sealer is one of them. It is safe to use around your children and pets.
In addition, it is basically a siloxane water-repellent sealer which protects the surface from getting cracks and fills the small potholes and removes the stain.
This stain is white in color and dries immediately.
Pros
- No harmful chemicals.
- Non-inflammable.
- The 5 gallons of it covers up to 1200 sq.ft.
- It is vapor permeable.
Cons
- It can be only applied by using a garden pump sprayer.
Consumers reports
Hundreds of buyers have rated this sealer with 4.3 stars out of 5.
The users were impressed with its ease of application. One needs to unseal the container, mix it and apply it via a sprayer.
Although most of the sealers work this way, this one is only applicable via a sprayers which makes the whole scenario easier.
Our suggestion
Our ratings: 8/10.
If you are looking for an environmentally friendly and non-toxic concrete sealer for your driveway, then this one would be a good consideration.
12. AQUA-X 11 Clear Penetrating Stone and Concrete Sealer
Well, this one is another concrete sealer but the ingredients it consists of are specifically fortified with mold, mildews and fungal growth inhibitors.
The 1 gallon size of this sealer can cover up to 500 sq.ft. surface.
The sealer is highly penetrable water-based and water-repellent sealer allows the concrete driveways to get cure from small holes, stains and salt damage.
However, one needs to coat the surface more than 2 times for better results.
ADDITIONAL TIP: Don’t try to apply this sealer when the temperature is below 50 degree Fahrenheit (10 degree Celsius).
Pros
- Best to inhibit the growth of molds.
- It offers a clear matte finish.
- Best for rainy and humid regions.
- It offers very low VOCs (volatile compounds).
- Available in 1 gallon and 5 gallon containers.
Cons
- One needs to multiple coats this sealer for efficient results.
Consumers reports
Hundreds of buyers have rated this sealer with 4.4 stars out of 5.
Most of the customers who wanted to seal their concrete patio used this sealer to remove the stains and molds from the surface and the results were very impressive.
They are still happy with its performance and recommend it to others.
Our suggestion
Our ratings: 8.5/10.
If you live in a region which is prone to rainfalls or has a high humidity level, there are high chances your driveway and patio can have molds, mildews and fungal growth.
So, we would recommend you to opt for AQUA-X 11 concrete sealer.
13. Road Rescue Asphalt and concrete Repair
The next recommendation is for both asphalt and concrete surface with big and large holes, potholes and cracks.
This sealer is basically inclined towards repairing the road or any surface rather than sealing it.
The single packet of this repairing sealer can cover up to 7 sq.ft surface. You can apply it in any weather condition; hot or cold.
The application of this rocky sealer is a bit different from others; one needs to pour these rocks on the worn out surface with holes, cracks or potholes, then use your vehicle and drive through it to make the surface even.
The rocks will bind very tightly and the infused oils present in them allows the rocks to bind with the surface permanently.
Pros
- Available in multiple sizes.
- Natural asphaltic rocks.
- It can repair heavy-duty roads also.
- Easy application.
Cons
- It repairs the surface but doesn’t seal it.
Consumers reports
Hundreds of buyers have rated this sealer with 4.5 stars out of 5.
According to them, this concrete and asphalt rock repair sealer fills all kinds of holes and makes the surface smooth with no hint of holes and cracks.
Our suggestion
Our ratings: 8.5/10.
We consider this sealer best to fill all types of holes, potholes and cracks on heavy duty roads and worn out driveways.
So, if you are facing this type of issue, consider this one a good option.
14. Flex Seal Spray Rubber Sealant Coating
The next recommendation is flex seal rubber sealant which is the most convenient and cheapest adhesive spray which is used to fill cracks and small holes.
These sprays are water-proof and strong rubber sealants which can easily fill the small cracks, holes and leakages.
You can use this rubber sealer on concrete, plastic, glass, cement, fabrics, tiles and on metal surfaces.
This flex sealer can also be used to fill the cracks and small potholes on an asphalt surface.
Pros
- Comes in two packs.
- Affordable and cheapest sealer.
- It helps to stop the leaks as well.
- Available in a variety of colors.
Cons
- Multiple coatings are required for best results.
Consumers reports
Thousands of buyers have rated this sealer with 4.6 stars out of 5.
The only negative response we got about this sealer is it requires multiple coatings.
Otherwise, it is the most convenient rubber sealer spray to fill cracks and leaks.
Our suggestion
Our ratings: 8/10.
If you are looking for a sealer to seal minor inconveniences at your home like; fill the cracks of concrete walls, and leakages.
In short, it is best for those homeowners who want a convenient option in their reach to fill the cracks and leakages when they want to.
15. Driveway Elastomeric Emulsion Crack Filler
Lastly, we recommend Elastomeric crack filler for asphalt driveways.
Well, this one is specifically designed to fill and seal the cracks of the asphalt driveways.
The sealer is made up of an emulsion of rubber polymer which is highly adhesive and fills the cracks pretty impressively.
The sealer is water-repellent and it creates a flexible and tough seal to the cracks on the driveways.
However, it is a bit thinner and the coating depends upon the size of the crack.
Pros
- Seals the holes and cracks on the asphalt surface.
- Easy to apply.
- Easy mixing after opening the container.
- It is highly adhesive.
- Best asphalt crack sealer.
Cons
- A bit thin.
Consumers reports
Hundreds of buyers have rated this sealer with 4.5 stars out of 5.
A Lot of them considered this sealer the best for asphalt driveways and some of them complained that it doesn’t fill the large holes efficiently.
However, the positive feedback outshines the negative one.
Our suggestion
Our ratings: 8.5/10.
If you are someone who is only worried about the cracks on your asphalt driveway due to heavy rainfall, then this elastomeric emulsion sealer would be a good help for you.
FAQs
Below are some commonly asked questions regarding these sealers that we have answered.
Which is better, oil or water based driveway sealer?
Well, it depends upon your personal choice to be honest.
For household projects (DIY chores) we would recommend you to opt for water based sealers and for commercial or heavy duty chores, an oil based sealer would be the best option.
Also, water-based sealers are more durable than oil-based ones as the later one cracks after some years.
What is the best type of driveway sealer?
If we talk about the concrete driveways, the penetrating sealers are the best ones and if we talk about asphalt driveways, emulsion based sealers are the best choice to opt for.
How to remove driveway sealer from garage door?
Pour some mineral spirit on a cloth or cotton and wipe the sealer gently where it is present on a door and gently scrub it and you are good to go.
What type of roller to use for driveway sealer?
Heavy duty paint rollers are good to use for driveway sealers.
How long is a driveway sealer good for in a container?
Well, it varies from brand to brand but on an average, a sealer can stay unsealed in a container for up to 5 to 10 years.
How long does it take for driveway sealers to dry?
On an average, one should wait for 1 to 2 days for the sealer to dry, especially the asphalt sealers.
However, some of the sealers require only 4-5 hours to dry the sealer. Concrete sealers require less time by the way.
How much driveway sealer do I need?
For the calculation, divide the surface area of your driveway (e.g; 1000 sq.ft ) by 80 to determine the number of gallons you need to apply on your surface.
How to get driveway sealer off skin?
If your skin gets the sealer spot, soak that area in a soapy water (a soap containing pumice would be a good option) and rub it thoroughly until the stain removes.
How long does the driveway sealer dry before rain?
A driveway sealer (either for asphalt or concrete) needs at least 4 to 8 hours to cure before rain falls.
How long does it take for driveway sealer smell to go away?
Some water-based sealers are odorless and oil-based sealers require a couple of days to evaporate the smell.
What causes driveway sealers to turn milky?
The driveways in which water is trapped causes it to turn milky.
Final verdict
The debate of the best sealers for asphalt and concrete driveways came to an end and we hope you enjoyed this informative journey with us.
Black and shiny asphalt driveways put a great impression on the outsiders, the same is the case with concrete driveways.
It is of utmost importance to maintain your driveway, the same way you maintain your interior.
For that, you need a driveway sealer and we have mentioned the best ones in the market which are reliable and durable.
You can choose the best one according to your driveway’s condition and preferences.
